OCPD Overcurrent Protection Device for Fire Pumps

The OCPD provides an upstream means of disconnecting the incoming power from electric fire pump controllers (FPC). By using the OCPD, the FPC can be fully isolated for additional site personnel safety. Installation of the OCPD mitigates any arc flash risk in the fire pump controller. The OCPD is acceptable for installation in the USA and is UL listed for fire pump service as per the requirements of NFPA 20 section 9.2.3.4.1 and NEC (NFPA 70) section 695.4(B)(2)(a)(2), along with the requirements for the alternative (Source 2) circuit NEC (NFPA 70) section 695.3(F)(2).

Bid Submittals

Eaton OCPD - Bid Submittal Documents

Features

• Enclosures
  The OCPD come standard with UL type 2 (drip-proof) enclosures.
• Flange-mounted disconnect
  Eaton’s flange-mounted disconnect that is lockable in both the open (OFF) and closed (ON) positions
• Lockable latches
  The enclosure features lockable quarter-turn handles on the Size 2–3 and Size 5 enclosures; refer to the dimensional drawings for more information. The Size 6 enclosure uses a key lock handle.
• Service entrance rated
  Suitable for use as service entrance equipment in the USA.